貨號 | 操作 | 名稱 | 描述 | 規格尺寸 |
---|
圖片 | 名稱 | 貨號貨期 | 描述 | 參數 | 價格 |
---|
硒化鋅 (ZnSe) 是最常用的材料,因為它對紅外 CO2 激光束的透過率高(吸收系數小),并且可以傳播可見的導光。使用非球面鏡頭、平凸鏡頭或彎月鏡頭。焦距越長,光斑直徑和焦距越大。請根據工件選擇鏡頭。當使用高壓氣體來輔助切削加工時,請根據氣壓選擇鏡頭的厚度。
● 高數值孔徑,zui佳收集效率
● 緊湊的單透鏡設計
● 衍射限制設計
● RoHS 認證
● 深紅外光譜分析
● 紫外激光傳輸
● CO2激光器
● 紅外光學
● 外延基片
透射波段范圍: | 0.6 to 21.0 um |
折射率: | 2.4028 at 10.6 um |
反射損耗: | 29.1% at 10.6 um (2 surfaces) |
吸收系數: | 0.0005 cm-1at 10.6 um |
吸收峰: | 45.7 um |
dn/dT: | +61 x 10-6/℃ at 10.6 um at 298K |
dn/du = 0 : | 5.5 um |
密度: | 5.27 g/cc |
熔點: | 1525℃ (see notes below) |
導熱系數: | 18 W m-1 K-1at 298K |
熱膨脹: | 7.1 x 10-6/℃at 273K |
硬度 : | Knoop 120 with 50g indenter |
比熱容量 : | 339 J Kg-1K-1 |
Dielectric Constant : | n/a |
Youngs Modulus (E) : | 67.2 GPa |
Shear Modulus (G) : | n/a |
Bulk Modulus (K) : | 40 GPa |
彈性系數 : | Not Available |
Apparent Elastic Limit : | 55.1 MPa (8000 psi) |
泊松比 : | 0.28 |
Solubility: | 0.001g/100g water |
Molecular Weight : | 144.33 |
Class/Structure: | HIP polycrystalline cubic, ZnS, F43m |
折射率:(No = Ordinary Ray)
μm | No | μm | No | μm | No |
0.54 | 2.6754 | 0.58 | 2.6312 | 0.62 | 2.5994 |
0.66 | 2.5755 | 0.7 | 2.5568 | 0.74 | 2.5418 |
0.78 | 2.5295 | 0.82 | 2.5193 | 0.86 | 2.5107 |
0.90 | 2.5034 | 0.94 | 2.4971 | 0.98 | 2.4916 |
1.0 | 2.4892 | 1.4 | 2.4609 | 1.8 | 2.4496 |
2.2 | 2.4437 | 2.6 | 2.4401 | 3.0 | 2.4376 |
3.4 | 2.4356 | 3.8 | 2.4339 | 4.2 | 2.4324 |
4.6 | 2.4309 | 5.0 | 2.4295 | 5.4 | 2.4281 |
5.8 | 2.4266 | 6.2 | 2.4251 | 6.6 | 2.4235 |
7.0 | 2.4218 | 7.4 | 2.4201 | 7.8 | 2.4183 |
8.2 | 2.4163 | 8.6 | 2.4143 | 9.0 | 2.4122 |
9.4 | 2.4100 | 9.8 | 2.4077 | 10.2 | 2.4053 |
10.6 | 2.4028 | 11.0 | 2.4001 | 11.4 | 2.3974 |
11.8 | 2.3945 | 12.2 | 2.3915 | 12.6 | 2.3883 |
13.0 | 2.3850 | 13.4 | 2.3816 | 13.8 | 2.3781 |
14.2 | 2.3744 | 14.6 | 2.3705 | 15.0 | 2.3665 |
15.4 | 2.3623 | 15.8 | 2.3579 | 16.2 | 2.3534 |
16.6 | 2.3487 | 17.0 | 2.3438 | 17.4 | 2.3387 |
17.8 | 2.3333 | 18.2 | 2.3278 |
透射曲線圖
鍍膜光譜
針對CO2激光器 10.6um鍍膜(定制可以咨詢)
硒化鋅窗口及部件
尺寸 | 數量 | 備注 |
3.4 mm ? x 0.5 mm | 129 Pcs | |
3.4 mm ? x 0.5 mm | 5 Pcs | Coated BBAR 3-12μm |
3.75 mm ? x 0.5 mm | 11 Pcs | |
4.0 mm ? x 0.5 mm | 3 Pcs | |
4.0 mm ? x 1.0 mm | 17 Pcs | |
5.0 mm ? x 1.0 mm | 14 Pcs | 1 degree wedge |
5.0 mm ? x 6.0 mm | 4 Pcs | |
5.75 mm ? x 0.5 mm | 24 Pcs | |
6.0 mm ? x 2.0 mm | 19 Pcs | Wedged 45' |
6.35 mm ? x 2.0 mm | 3 Pcs | |
6.5 mm ? x 0.8 mm | 36 Pcs | |
7.0 mm ? x 1.0 mm | 24 Pcs | |
7.3 mm ? x 1.0 mm | 5 Pcs | |
7.4 mm ? x 0.9 mm | 504 Pcs | |
7.85 mm ? x 1.0 mm | 26 Pcs | BBAR 2-15μm |
8.0 mm ? x 0.5 mm | 25 Pcs | |
8.0 mm ? x 1.0 mm | 29 Pcs | |
8.0 mm ? x 1.0 mm | 60 Pcs | AR 2-15μm |
9.0 mm ? x 2.0 mm | 42 Pcs | |
10.0 mm ? x 0.5 mm | 8 Pcs | Parallel to<36 sec |
10.0 mm ? x 1.5 mm | 1 Pcs | AR Wedge 8min |
10.0 mm ? x 2.0 mm | 17 Pcs | |
10.0 mm ? x 2.0 mm | 3 Pcs | AR2-15μm |
10.0 mm ? x 2.0 mm | 6 Pcs | 1° Wedge |
10.0 mm ? x 3.0 mm | 1 Pcs | |
10.0 mm ? x 5.0 mm | 9 Pcs | |
11.0 mm ? x 0.5 mm | 1 Pcs | |
11.0 mm ? x 4.0 mm | 11 Pcs | |
12.0 mm ? x 0.4 mm | 17 Pcs | |
12.0 mm ? x 2.0 mm | 25 Pcs | |
12.0 mm ? x 2.0 mm | 3 Pcs | 1° Wedge |
12.0 mm ? x 2.0 mm | 1 Pcs | AR 400-700 μm |
12.0 mm ? x 8.0 mm | 7 Pcs | |
12.5 mm ? x 2.0 mm | 1 Pcs | 0.5 degree Wedge |
尺寸 | 數量 | 備注 |
12.7 mm ? x 3.0 mm | 11 Pcs | 2-3 Fringes |
12.8 mm ? x 3.0 mm | 3 Pcs | Polished one face |
13.0 mm ? x 0.5 mm | 32 Pcs | |
13.0 mm ? x 4.0 mm | 1 Pcs | |
13.0 mm ? x 5.0 mm | 4 Pcs | |
13.0 mm ? x 6.0 mm | 1 Pcs | AR/AR 500-700nm |
13.0 mm ? x 6.0 mm | 11 Pcs | |
13.0 mm ? x 10.0 mm | 5 Pcs | |
13.5 mm ? x 3.0 mm | 15 Pcs | |
14.0 mm ? x 2.0 mm | 31 Pcs | |
15.0 mm ? x 1 mm | 4 Pcs | |
15.0 mm ? x 4.0 mm | 1 Pcs | |
15.0 mm ? x 5.0 mm | 5 Pcs | |
16.0 mm ? x 1.0 mm | 37 Pcs | |
16.0 mm ? x 1.0 mm | 3 Pcs | 1min 30 sec Wedge |
16.0 mm ? x 2.0 mm | 4 Pcs | |
17.5 mm ? x 1.5 mm | 10 Pcs | |
17.5 mm ? x 1.5 mm | 8 Pcs | BBAR/BBAR 2-15 μm |
18.0 mm ? x 2.0 mm | 6 Pcs | |
18.0 mm ? x 7.0 mm | 5 Pcs | |
19.0 mm ? x 2.0 mm | 1 Pcs | |
19.0 mm ? x 3.2 mm | 5 Pcs | |
19.4 mm ? x 1.5 mm | 9 Pcs | |
19.8 mm ? x 1.8 mm | 2 Pcs | |
19.8 mm ? x 2.0 mm | 6 Pcs | |
19.8 mm ? x 3.0 mm | 10 Pcs | |
20.0 mm ? x 1.5 mm | 36 Pcs | |
20.0 mm ? x 2.0 mm | 8 Pcs | |
20.0 mm ? x 3.0 mm | 36 Pcs | |
20.0 mm ? x 4.0 mm | 1 Pcs | AR/AR 2 – 12.5μm |
20.0 mm ? x 5.0 mm | 3 Pcs | AR 2-15μm |
22.0 mm ? x 0.3 mm | 5 Pcs | |
22.0 mm ? x 1.5 mm | 2 Pcs | |
22.5 mm ? x 3.5 mm | 2 Pcs | |
23.0 mm ? x 2.0 mm | 1 Pcs | |
23.8 mm ? x 2.0 mm | 2 Pcs | |
24.0 mm ? x 2.5 mm | 6 Pcs | |
24.0 mm ? x 2.5 mm | 2 Pcs | Semi Circular |
25.0 mm ? x 1.0 mm | 5 Pcs | AR 8 -12 μm |
25.0 mm ? x 1.5 mm | 12 Pcs | |
25.0 mm ? x 2.0 mm | 2 Pcs | AR (one face) 2 – 15μm |
25.0 mm ? x 2.0 mm | 4 Pcs | AR/AR (both faces) 2 – 15μm |
尺寸 | 數量 | 備注 |
25.0 mm ? x 2.7 mm | 8 Pcs | AR/AR 2-12μm |
25.0 mm ? x 4.0 mm | 4 Pcs | Drilled |
25.0 mm ? x 4.0 mm | 2 Pcs | |
25.0 mm ? x 5.0 mm | 1 Pcs | |
25.0 mm ? x 5.0 mm | 1 Pcs | AR one face 2-15 μm |
25.0 mm ? x 6.0 mm | 1 Pcs | |
25.0 mm ? x 10.0 mm | 1 Pcs | AR/AR Coated 1000-8000 nm |
25.2 mm ? x 1.0 mm | 4 Pcs | |
25.2 mm ? x 2.0 mm | 5 Pcs | |
25.4 mm ? x 0.5 mm | 2 Pcs | AR 8-12μm |
25.4 mm ? x 1.0 mm | 21 Pcs | |
25.4 mm ? x 1.1 mm | 7 Pcs | |
25.4 mm ? x 1.1 mm | 7 Pcs | |
25.4 mm ? x 2.0 mm | 23 Pcs | |
25.4 mm ? x 2.8 mm | 21 Pcs | |
25.4 mm ? x 3.0 mm | 7 Pcs | |
25.4 mm ? x 3.0 mm | 10 Pcs | AR/AR 2 – 12.5μm |
25.4 mm ? x 4.0 mm | 4 Pcs | AR/AR 7-14 μm |
25.4 mm ? x 7.0 mm | 26 Pcs | 7 Degree wedge |
25.4 mm ? x 10.0 mm | 2 Pcs | |
25.4 mm ? x 15.0 mm | 1 Pcs | AR 0.97-0.99μm |
26.0 mm ? x 5.0 mm | 1 Pcs | |
26.74 mm ? x 0.95 mm | ||
1.125” ? x 0.062” | 2 Pcs | Bevelled edges (28.57mm x1.57mm) |
29.9 mm ? x 8.0 mm | 3 Pcs | |
30.0 mm ? x 0.6 mm | 4 Pcs | |
30.0 mm ? x 2.0 mm | 1 Pcs | |
30.0 mm ? x 4.0 mm | 5 Pcs | |
30.0 mm ? x 5.0 mm | 4 Pcs | |
30.0 mm ? x 6.0 mm | 1 Pcs | |
32.0 mm ? x 4.0 mm | 2 Pcs | |
32.0 mm ? x 4.0 mm | 2 Pcs | |
32.0 mm ? x 4.8 mm | 1 Pcs | |
32.5 mm ? x 5.0 mm | 1 Pcs | |
32.5 mm ? x 5.0 mm | 8 Pcs | Coated both faces AR/AR @ 10.6μm |
1.375” ? x 1/16” | 1 Pcs | Bevelled edges (34.92mm x1.58mm) |
35.0 mm ? x 2.0 mm | 4 Pcs | |
35.0 mm ? x 3.0 mm | 2 Pcs | |
35.0 mm ? x 7.0 mm | 2 Pcs | AR for 10.6μm/hole central/1° Wedge |
37.5 mm ? x 2.0 mm | 1 Pcs | |
38.0 mm ? x 3.0 mm | 2 Pcs |
尺寸 | 數量 | 備注 |
38.1 mm ? x 2.0 mm | 2 Pcs | 7° Wedge |
38.1 mm ? x 4.0 mm | 1 Pcs | AR 3-12μm |
38.1 mm ? x 4.0 mm | 1 Pcs | |
39.2 mm ? x 5.0 mm | 4 Pcs | |
40.0 mm ? x 2.0 mm | 1 Pcs | AR/AR 10.6 μm |
40.0 mm ? x 3.0 mm | 1 Pcs | |
42.0 mm ? x 2.0 mm | 1 Pcs | |
45.0 mm ? x 4.0 mm | 1 Pcs | |
45.0 mm ? x 8.0 mm | 1 Pcs | |
47.0 mm ? x 4.0 mm | 1 Pcs | |
47.5 mm ? x 7.5 mm | 1 Pcs | |
50.0 mm ? x 5 mm | 3 Pcs | |
55.0 mm ? x 1 mm | 1 Pcs | |
68.25 mm ? x 2.5 mm | 1 Pcs | AR/AR Coated 650nm & 1550nm, Wedge |
100.0 mm ? x 6.0mm | 1 Pcs | AR/AR Coated |
12mm x 12mm x 1mm | 6 Pcs | |
13mm x 13mm x 2mm | 3 Pcs | |
14.5mm x 3.5mm x 1mm | 5 Pcs | |
20mm x 20mm x 0.5mm | 3 Pcs | |
27mm x 19mm x 1mm | 5 Pcs | |
29.5mm x 11.5mm x 1mm | 5 Pcs | |
30mm x 30mm x 1mm | 2 Pcs | |
30mm x 30mm x 4mm | 6 Pcs | |
35mm x 35mm x 3mm | 2 Pcs | Drilled |
36mm x 25mm x 3 mm | 1 Pcs | |
38mm x 19mm x 4mm | 1 Pcs | Drilled |
38mm x 19mm x 4mm | 1 Pcs | Drilled |
38.1mm x 38.1mm x 7mm | 2 Pcs | |
41mm x 23mm x 2mm | 9 Pcs | Drilled |
41mm x 23mm x 4mm | 1 Pcs | |
41mm x 25mm x 5mm | 2 Pcs | |
66mm x 38.3mm x 1.5mm | 1 Pcs | |
71mm x 53mm x 3mm | 2 Pcs | |
80mm x 10mm x 4mm | 1 Pcs | |
80mm x 40mm x 4mm | 2 Pcs | |
105mm x 50mm x 5mm | 1 Pcs | |
117mm x 50mm x 1mm | 1 Pcs | |
143mm x 35mm x 4mm | 1 Pcs | Drilled |
190mm x 130mm x4mm | 1 Pcs |